Skip to main content

Refreshing the wood of the old bathroom cabinet that had gotten moldy.
#theBoatyard
All the parts roughly assembled.
A the parts with sealant in the painting nails holes.
#theBoatyard
This entry was edited (1 year ago)
Unknown parent

Devine Lu Linvega
Devine Lu Linvega
• •
@Benhm3 fiberglass is pretty heavy, and expensive. We'll varnish this thick and it should be enough 😀

It was poorly made before, also it was 40 years old.
@Large Format Projectionist
in reply to Devine Lu Linvega

Devine Lu Linvega
Devine Lu Linvega
• •
Before/after, we insulated the back wall of the bathroom and painted it. It's going to be so much nicer next winter.
#theBoatyard
#theBoatyard
in reply to Devine Lu Linvega

Devine Lu Linvega
Devine Lu Linvega
• •
Test fitting of the new-old cabinetry that we've taken apart and cleaned up.
#theBoatyard
Everything in place, but nothing screwed in yet.
Holding up the trims up front.
#theBoatyard
in reply to Devine Lu Linvega

nomand
nomand
• •
one day, new owners of Pino are going to be in a world of wonder uncovering the life that went on, if they weren't already following the boat ❀
in reply to nomand

Devine Lu Linvega
Devine Lu Linvega
• •
@nomand we should leave little notes and treasures behind the walls, and at the back of furnitures for if someone ever take it apart again 😀
@nomand
in reply to Devine Lu Linvega

418 I'm a Teapot
418 I'm a Teapot
• •
@rek what are you using
as insulation?
@R E K
in reply to 418 I'm a Teapot

Devine Lu Linvega
Devine Lu Linvega
• •
@chainik @rek So we've tried EPS for the left side of the boat, and XPS for the right side so we could compare the difference.
@R E K @418 I'm a Teapot
in reply to Devine Lu Linvega

418 I'm a Teapot
418 I'm a Teapot
• •
@rek interested to hear how it works out
 insulation is on my list
 what did you use to stick it to the wall?
@R E K
in reply to Devine Lu Linvega

Devine Lu Linvega
Devine Lu Linvega
• •
Glassed the rails, and tested the windows. We're adding a shelf perfectly size to our huge medkit.
#theBoatyard
Cabinet sides altogether.
Acrylic windows installed.
#theBoatyard
in reply to Devine Lu Linvega

Devine Lu Linvega
Devine Lu Linvega
• •
#finishit -ed the bathroom cabinet! You can see the recycled bamboo cutting board turned shelf.
#theBoatyard
#theBoatyard #finishit
in reply to Devine Lu Linvega

rostiger
rostiger
• •
Nicely done! Were you able to reuse old parts of the cabinet or are all the pieces fresh? Also is there a workshop in the marina or did you do all the work on board?
in reply to rostiger

Devine Lu Linvega
Devine Lu Linvega
• •
@rostiger we reused as much as we could, and made a couple of new pieces that had rotted away. It was in total a 12$ project.

We did all the work on the docks XD
@rostiger
in reply to Devine Lu Linvega

rostiger
rostiger
• •
Nice! Sounds like spring time has finally arrived in Victoria as well then!
in reply to rostiger

Devine Lu Linvega
Devine Lu Linvega
• •
@rostiger yes! it has been so nice to be able to walk outside without a coat, at last.
@rostiger
in reply to Devine Lu Linvega

s-ol
s-ol
• •
the sliding door guides in this totally look like a modular synth cabinet and now I can't stop thinking about the sailing boat specific modules you'd have to have in there
in reply to s-ol

s-ol
s-ol
• •
lots of awesome CV modulation sources:
- GPS long/lat/speed
- Sonar ???
- wind strength / direction
- gyroscope angle, heading

build your own sonification system and learn to sail without sight!
in reply to s-ol

s-ol
s-ol
• •
and the forbidden category of boat output modules:
- rudder steering output
- sail winch kinda stuff?

"patch your own autopilot"
in reply to s-ol

Devine Lu Linvega
Devine Lu Linvega
• •
@s_ol All that stuff, the wind and water sloshing and the hull speed, we can hear directly. A sailboat is surprisingly loud on its own
@s-ol

Lo, thar be cookies on this site to keep track of your login. By clicking 'okay', you are CONSENTING to this.

⇧